**Author: Robert Murrish (June 2012)**

`mathtools`

is the package you likely never knew you needed. LaTeX makes typesetting equations easy, and `mathtools`

makes those equations beautiful.

`mathtools`

is an extention of `amsmath`

. If you include `mathtools`

, you can use any function or macro from that package. `amsmath`

is a broad set of tools for typesetting equations, and is widely used. `mathtools`

extends the `amsmath`

functions to provide additional formatting options and to clean up some of the more common problems with math typesetting.

A complicated fraction can extend so wide that it exceeds the column width. Splitting the numerator or/and denominator into multiple lines is a classy way to keep it together.

```
z=\frac{ab+cd+ef+gh+ij+kl+mn+op+qr}{y}
z=\frac{\splitfrac{ab+cd+ef+gh+ij}{+kl+mn+op+qr}}{y}
```

Without the `mathtools`

function `\mathclap`

, there are extra spaces created on either side of the summation symbol, because of the indices below. A simple `mathtools`

command condenses the result.

```
P_e_i_\Delta = \sum_{j=1, j\not=k,i}E_iE_jB_i_j cos\delta_i_j\delta_i_j_\Delta + V_kE_iB_i_k cos\delta_i_k_o \delta_i_k_\Delta
P_e_i_\Delta = \sum_{\mathclap{j=1, j\not=k,i}}E_iE_jB_i_j cos\delta_i_j \delta_i_j_\Delta + V_kE_iB_i_k cos\delta_i_k_o \delta_i_k_\Delta
```

Allows superscripts and subscripts to the left of (before) a symbol. Here's a chemistry example:

```
\prescript{238}{92}{\mathbf{U}}
```

These full examples are a good place to start exploring `mathtools`

, but there are many more tools available in this package. Below is a full listing of all the macros contained in the package (as of the date this article was written). For an up-to-date list, and specific details about how to use each one, see the documentation for the `mathtools`

package.

Function Name |
Description |

mathclap | This function typesets its argument without taking any horizontal space, protruding symmetrically on both sides. As shown above, this function can be used to remove some stray whitespace that can occur in subscripts, exponents, etc. |

mathrlap mathllap |
Same as mathclap, but only protrudes to the right or left side, respectively. |

cramped |
Similar to mathclap, this condenses certain items. For example, it brings exponents in a little tighter, which can be useful especially with more than one level of exponents. |

crampedclap crampedrlap crampedllap |
Applies both cramped and mathclap (or mathrlap, etc.). Same effect as applying both separately, but with a performance boost in the processing. |

smashoperator | Condenses text like a combination of all the functions above. It's simpler to use in most cases, but you lose some control and may not be so pleased with the result. In that case, use the functions above individually. |

adjustlimits | Works on limits (\lim), to make more complex limits align vertically. |

SwapAboveDisplaySkip | Elliminates some of the whitespace above an equation. |

newtagform renewtagform usetagform |
The "tags" are the equations numbers, and this set of functions allows you to modify them, e.g., change the parentheses, style, etc. |

refeq | An alternative way to reference functions within the document text, without causing font mis-match problems. |

showonlyrefs | This is a flag, not a function, but still quite useful. If set, only equations referenced in the text will receive equation numbers. |

showmanualtags |
Same as showonlyrefs, but for equations where manual tags have been set. |

noeqref | Allows you to create an exception to the two flags above, to show an equation number or tag, even if it is not referenced in the text. |

xleftrightarrow xLeftarrow xRightarrow xhookleftarrow xhookrightarrow xmapsto |
A set of functions for drawing various arrows that will expand as needed to fit the associated text. |

xrightharpoondown xleftharpoondown xrightharpoonup xleftharpoonup xrightleftharpoons xleftrightharpoons |
A set of 'harpoons' or vertical arrows. Similar to the arrows, they will expand as needed |

overbrace underbrace |
Puts a brace over or under equation. Same as the functions built into LaTeX, but will often typeset better. You can use \LaTeXoverbrace and \LaTeXunderbrace if you need the original LaTeX functions. |

overbracket underbracket |
Goes over or under an equation like overbrace and underbrace, but with square brakets. |

begin{matrix} and friends | There are several options for typesetting matrices. They mostly serve to center elements better than the default settings, but have some other options as well, like smallmatrix. I suggest you look at the official mathtools documentation to determine which would serve your need best, once you have a matrix defined. |

multlined | Split a long equation into parts, similar to the split fractions in the first example above. |

begin{cases} and friends |
Tools to properly typeset piecewise equations. Again, there are many options available, rather than cover them all, I refer you to the official mathtools documentation once you know what your piecewise equation looks like. |

MoveEqLeft | A way to produce indentation for equations if necessary. |

Aboxed | Draws a box around an equation. |

ArrowBetweenLines vdotswithin shortvdotswithin MTFlushSpaceAbove MTFlushSpaceBelow |
These functions allow for drawing in the whitespace between equations, arrows, dots, etc. |

shortintertext | Like the function \intertext in amsmath, this allows for inserting a bit of text in a series of equations without upsetting the alighment. This version of the function produces less whitespace. |

DeclarePairedDelimiter |
Allows for defining new delimiters, and example from the documentation is for creating a set of absolute value bars the proper height for a fraction. This function has some advanced options available. |

lparen rparen |
Equivalent to \left(, \right). Provided for compatibility. |

vcentcolon | Draws a colon centered vertically. |

nuparrow ndownarrow bigtimes |
Provides characters that are sometimes not otherwise available. |

prescript | Allows super- and subscripts before a character, as shown in example 3 above. |

begin{spreadlines} | The spreadlines environment allows you to explicitly define the vertical spacing between equations. |

splitfrac splitdfrac |
Allows for split numerators or denominators in fractions, as in example 1 above. |

The following are direct links to some of the mathtools documentation available:

- Creating a document in Overleaf
- Uploading a project
- Copying a project
- Creating a project from a template
- Including images in Overleaf
- Exporting your work from Overleaf
- Working offline in Overleaf
- Using Track Changes in Overleaf
- Using bibliographies in Overleaf
- Sharing your work with others
- Using the History feature
- Debugging Compilation timeout errors
- How-to guides

- Creating your first LaTeX document
- Choosing a LaTeX Compiler
- Paragraphs and new lines
- Bold, italics and underlining
- Lists
- Errors

- Mathematical expressions
- Subscripts and superscripts
- Brackets and Parentheses
- Matrices
- Fractions and Binomials
- Aligning Equations
- Operators
- Spacing in math mode
- Integrals, sums and limits
- Display style in math mode
- List of Greek letters and math symbols
- Mathematical fonts

- Inserting Images
- Tables
- Positioning Images and Tables
- Lists of Tables and Figures
- Drawing Diagrams Directly in LaTeX
- TikZ package

- Bibliography management in LaTeX
- Bibliography management with biblatex
- Biblatex bibliography styles
- Biblatex citation styles
- Bibliography management with natbib
- Natbib bibliography styles
- Natbib citation styles
- Bibliography management with bibtex
- Bibtex bibliography styles

- Multilingual typesetting on Overleaf using polyglossia and fontspec
- Multilingual typesetting on Overleaf using babel and fontspec
- International language support
- Quotations and quotation marks
- Arabic
- Chinese
- French
- German
- Greek
- Italian
- Japanese
- Korean
- Portuguese
- Russian
- Spanish

- Sections and chapters
- Table of contents
- Cross referencing sections and equations
- Indices
- Glossaries
- Nomenclatures
- Management in a large project
- Multi-file LaTeX projects
- Hyperlinks

- Lengths in LaTeX
- Headers and footers
- Page numbering
- Paragraph formatting
- Line breaks and blank spaces
- Text alignment
- Page size and margins
- Single sided and double sided documents
- Multiple columns
- Counters
- Code listing
- Code Highlighting with minted
- Using colours in LaTeX
- Footnotes
- Margin notes

- Theorems and proofs
- Chemistry formulae
- Feynman diagrams
- Molecular orbital diagrams
- Chess notation
- Knitting patterns
- CircuiTikz package
- Pgfplots package
- Typing exams in LaTeX
- Knitr
- Attribute Value Matrices

- Understanding packages and class files
- List of packages and class files
- Writing your own package
- Writing your own class
- Tips