Spring til indhold

There are three ways you can insert tables in Overleaf:

  1. Using the Insert table button in the editor toolbar.
  2. Copying and pasting a table from another document while using Visual Editor.
  3. Writing the LaTeX code for the table in Code Editor.

If you’re new to LaTeX, using the toolbar in Visual Editor (option 1) is a great way to get started. And you can switch between Visual Editor and Code Editor to see the code behind the table. This page focuses on option 3.

Creating a simple table in LaTeX

We can start with one of the simplest examples of a table:

\begin{center}
\begin{tabular}{ c c c }
 cell1 & cell2 & cell3 \\ 
 cell4 & cell5 & cell6 \\  
 cell7 & cell8 & cell9    
\end{tabular}
\end{center}

 Open this example in Overleaf.

Example of a table

The tabular environment is the default LaTeX method to create tables. You must specify a parameter to this environment; here we use {c c c} which tells LaTeX there are three columns and the text inside each one of them must be centred.

The tabular environment provides additional flexibility; for example, you can put separator lines in between each column:

\begin{center}
\begin{tabular}{ |c|c|c| } 
 \hline
 cell1 & cell2 & cell3 \\ 
 cell4 & cell5 & cell6 \\ 
 cell7 & cell8 & cell9 \\ 
 \hline
\end{tabular}
\end{center}

 Open this example in Overleaf.

Example of a simple table

Here is a description of the constructions used in the example above:

{ |c|c|c| }
This declares that three columns, separated by a vertical line, are going to be used in the table. Each c means that the contents of the column will be centred. You can also use r to align the text to the right and l for left alignment.
\hline
This will insert a horizontal line on top of the table and at the bottom too. There is no restriction on the number of times you can use \hline.
cell1 & cell2 & cell3 \\
Each & is a cell separator and the double-backslash \\ sets the end of this row.

Below you can see a second example which uses various vertical and horizontal lines (often called "rules"):

\begin{center}
\begin{tabular}{||c c c c||} 
 \hline
 Col1 & Col2 & Col2 & Col3 \\ [0.5ex] 
 \hline\hline
 1 & 6 & 87837 & 787 \\ 
 \hline
 2 & 7 & 78 & 5415 \\
 \hline
 3 & 545 & 778 & 7507 \\
 \hline
 4 & 545 & 18744 & 7560 \\
 \hline
 5 & 88 & 788 & 6344 \\ [1ex] 
 \hline
\end{tabular}
\end{center}

 Open this example in Overleaf.

Example of table with hline

Tables with a fixed width

When formatting a table you might require a fixed width, either for each column or for the entire table. The following example adds the array package to document preamble:

\usepackage{array}

and uses it to set fixed column widths:

\documentclass{article}
\usepackage{array}
\begin{document}
\begin{center}
\begin{tabular}{ | m{5em} | m{1cm}| m{1cm} | } 
  \hline
  cell1 dummy text dummy text dummy text& cell2 & cell3 \\ 
  \hline
  cell1 dummy text dummy text dummy text & cell5 & cell6 \\ 
  \hline
  cell7 & cell8 & cell9 \\ 
  \hline
\end{tabular}
\end{center}
\end{document}

 Open this example in Overleaf.

Example of table with fixed width

In the tabular environment, the parameter m{5em} sets a width of 5em for the first column (1cm for the other two) and centres the text in the middle of the cell. The aligning options are m for middle, p for top and b for bottom. When using these parameters the text is automatically formatted to fit inside each cell.

If you don't need to control the width of each cell, but of the entire table and then evenly distribute the space within, use the tabularx package. See the example below:

\documentclass{article}
\usepackage{tabularx}
\begin{document}
\begin{tabularx}{0.8\textwidth} { 
  | >{\raggedright\arraybackslash}X 
  | >{\centering\arraybackslash}X 
  | >{\raggedleft\arraybackslash}X | }
 \hline
 item 11 & item 12 & item 13 \\
 \hline
 item 21  & item 22  & item 23  \\
\hline
\end{tabularx}
\end{document}

 Open this example in Overleaf.

Example of table with tabularx package

The environment tabularx is similar to tabular but more flexible. To use it, add the line \usepackage{tabularx} to the document preamble. Notice that the environment opening statement is different, in the example the table width is set to 0.8\textwidth, which is 80% of the document's text width. You can use any of the LaTeX units to set that value.

The prefix inside braces | >{\raggedright\arraybackslash}X | >{\centering\arraybackslash}X | >{\raggedleft\arraybackslash}X | sets the alignment of each column: the first one to left, the second one to center and the third one to right.

Combining rows and columns

Rows and columns can be merged to create larger table cells. The following example uses the \multicolumn command to merge several columns:

\documentclass{article}
\usepackage{multirow}
\begin{document}
\begin{tabular}{ |p{3cm}||p{3cm}|p{3cm}|p{3cm}|  }
 \hline
 \multicolumn{4}{|c|}{Country List} \\
 \hline
 Country Name or Area Name& ISO ALPHA 2 Code &ISO ALPHA 3 Code&ISO numeric Code\\
 \hline
 Afghanistan   & AF    &AFG&   004\\
 Aland Islands&   AX  & ALA   &248\\
 Albania &AL & ALB&  008\\
 Algeria    &DZ & DZA&  012\\
 American Samoa&   AS  & ASM&016\\
 Andorra& AD  & AND   &020\\
 Angola& AO  & AGO&024\\
 \hline
\end{tabular}
\end{document}

 Open this example in Overleaf.

Example of table using multicolumn command

Let's review each component of the command \multicolumn{4}{|c|}{Country List} \\:

{4}
The number of columns to be combined: 4 in this case.
{|c|}
Delimiters and alignment of the resulting cell: in this case the text will be centred and a vertical line will be drawn at each side of the cell.
{Country List}
Text to be displayed inside the cell.

To combine rows you need to add the multirow package to your document preamble:

\usepackage{multirow}

You can then use the \multirow command in your document:

\documentclass{article}
\usepackage{multirow}
\begin{document}
\begin{center}
\begin{tabular}{ |c|c|c| } 
\hline
col1 & col2 & col3 \\
\hline
\multirow{3}{4em}{Multiple row} & cell2 & cell3 \\ 
& cell5 & cell6 \\ 
& cell8 & cell9 \\ 
\hline
\end{tabular}
\end{center}
\end{document}

 Open this example in Overleaf.

Example of table using multirow command

The multirow command takes three parameters; our example uses the following settings:

  1. the number of rows to be combined: 3
  2. the width of the column: 4em
  3. the content of the cell: Multiple row

Multi-page tables

If you have to insert a very long table, which takes up two or more pages in your document, use the longtable package. First, add the following line to your document preamble:

\usepackage{longtable}

You can then use the longtable environment, as shown in the following example:

\documentclass{article}
\usepackage{longtable}

\begin{document}
 
 \begin{longtable}[c]{| c | c |}
 \caption{Long table caption.\label{long}}\\

 \hline
 \multicolumn{2}{| c |}{Begin of Table}\\
 \hline
 Something & something else\\
 \hline
 \endfirsthead

 \hline
 \multicolumn{2}{|c|}{Continuation of Table \ref{long}}\\
 \hline
 Something & something else\\
 \hline
 \endhead

 \hline
 \endfoot

 \hline
 \multicolumn{2}{| c |}{End of Table}\\
 \hline\hline
 \endlastfoot

 Lots of lines & like this\\
 Lots of lines & like this\\
 Lots of lines & like this\\
 Lots of lines & like this\\
 Lots of lines & like this\\
 Lots of lines & like this\\
 Lots of lines & like this\\
 Lots of lines & like this\\
 ...
 Lots of lines & like this\\
 \end{longtable}

Example of table with a lot of lines

 Open a longtable example in Overleaf


The behaviour of longtable is similar to the default tabular, but generates tables that can be broken by the standard LaTeX page-breaking algorithm. There are four longtable-specific elements:

\endfirsthead
Everything above this command will appear at the beginning of the table, in the first page.
\endhead
Whatever you put before this command and below \endfirsthead will be displayed at the top of the table in every page except the first one.
\endfoot
Similar to \endhead, what you put after \endhead and before this command will appear at the bottom of the table in every page except the last one.
\endlastfoot
Similar to \endfirsthead. The elements after \endfoot and before this command will be displayed at the bottom of the table but only in the last page where the table appears.

Positioning tables

Positioning a table is easy if they're inside a float table environment.

\documentclass{article}
\begin{document}
Below is a table positioned exactly here:
\begin{table}[h!]
\centering
 \begin{tabular}{||c c c c||} 
 \hline
 Col1 & Col2 & Col2 & Col3 \\ [0.5ex] 
 \hline\hline
 1 & 6 & 87837 & 787 \\ 
 2 & 7 & 78 & 5415 \\
 3 & 545 & 778 & 7507 \\
 4 & 545 & 18744 & 7560 \\
 5 & 88 & 788 & 6344 \\ [1ex] 
 \hline
 \end{tabular}
\end{table}
\end{document}

 Open this example in Overleaf.

Example of positioning a table

The parameter h! passed to the table environment declaration establishes that this table must be placed here, and override LaTeX defaults. The positioning parameters that can be passed-in include:

h
Will place the table here approximately.
t
Position the table at the top of the page.
b
Position the table at the bottom of the page.
p
Put the table in a special page, for tables only.
!
Override internal LaTeX parameters.
H
Place the table at this precise location, pretty much like h!.

For further examples on table positioning see the Positioning images and tables article.

In this example there are a few more commands:

\centering
Centres the table relative to the float container element.
\[1ex]
This adds extra space to the cell.

Captions, labels and references

Tables can be captioned, labelled and referenced by means of the table environment.

\documentclass{article}
\begin{document}
Table \ref{table:1} is an example of a referenced \LaTeX{} element.

\begin{table}[h!]
\centering
\begin{tabular}{||c c c c||} 
 \hline
 Col1 & Col2 & Col2 & Col3 \\ [0.5ex] 
 \hline\hline
 1 & 6 & 87837 & 787 \\ 
 2 & 7 & 78 & 5415 \\
 3 & 545 & 778 & 7507 \\
 4 & 545 & 18744 & 7560 \\
 5 & 88 & 788 & 6344 \\ [1ex] 
 \hline
\end{tabular}
\caption{Table to test captions and labels.}
\label{table:1}
\end{table}
\end{document}

 Open this example in Overleaf.

Example of referenced LaTeX elements

There are three important commands in the example:

\caption{Table to test captions and labels}
As you may expect this command sets the caption for the table. If you create a list of tables this caption will be used there. You can place it above or below the table.
\label{table:1}
If you need to reference the table within your document, set a label with this command. The label will number the table and, when combined with the \ref command, will allow you to reference it.
\ref{table:1}
This code will be substituted by the number corresponding to the referenced table.

List of tables

To create a list of tables use the \listoftables command. The caption of each table will be used to generate this list. For languages supported by the babel package, the title "List of tables" will be translated accordingly. See the article about International language support for more info.

\documentclass{article}
\begin{document}
\listoftables
\vspace{5pt}
The table \ref{table:1} is an example of referenced \LaTeX{} elements.

\begin{table}[h!]
\centering
\begin{tabular}{||c c c c||} 
 \hline
 Col1 & Col2 & Col2 & Col3 \\ [0.5ex] 
 \hline\hline
 1 & 6 & 87837 & 787 \\ 
 2 & 7 & 78 & 5415 \\
 3 & 545 & 778 & 7507 \\
 4 & 545 & 18744 & 7560 \\
 5 & 88 & 788 & 6344 \\ [1ex] 
 \hline
\end{tabular}
\caption{This is the caption for the first table.}
\label{table:1}
\end{table}

\begin{table}[h!]
\centering
\begin{tabular}{||c c c c||} 
 \hline
 Col1 & Col2 & Col2 & Col3 \\ [0.5ex] 
 \hline\hline
  4 & 545 & 18744 & 7560 \\
 5 & 88 & 788 & 6344 \\ [1ex] 
 \hline
\end{tabular}
\caption{This is the caption for the second table.}
\label{table:2}
\end{table}
\end{document}

 Open this example in Overleaf.

Example of list of tables

Changing the appearance of a table

Several table elements can be modified to suit the needs of your document. Below you will learn how to modify the line thickness, the line colour and the background colour of the cells in your table.

Line width and cell padding

The legibility of a table can sometimes be improved by incrementing the column spacing and row stretch.

\documentclass{article}
\setlength{\arrayrulewidth}{0.5mm}
\setlength{\tabcolsep}{18pt}
\renewcommand{\arraystretch}{1.5}
\begin{document}
\begin{tabular}{ |p{3cm}|p{3cm}|p{3cm}|  }
\hline
\multicolumn{3}{|c|}{Country List} \\
\hline
Country Name or Area Name& ISO ALPHA 2 Code &ISO ALPHA 3 \\
\hline
Afghanistan & AF &AFG \\
Aland Islands & AX   & ALA \\
Albania &AL & ALB \\
Algeria    &DZ & DZA \\
American Samoa & AS & ASM \\
Andorra & AD & AND   \\
Angola & AO & AGO \\
\hline
\end{tabular}
\end{document}

 Open this example in Overleaf.

Example of column spacing

A description of the commands is provided below:

\setlength{\arrayrulewidth}{0.5mm}
This sets the thickness of the borders of the table. In the example is 0.5mm but you can use other units—see the article Lengths in LaTeX for a complete list.
\setlength{\tabcolsep}{18pt}
The space between the text and the left/right border of its containing cell is set to 18pt with this command. Again, you may use other units if needed.
\renewcommand{\arraystretch}{1.5}
The height of each row is set to 1.5 relative to its default height.

Colour alternating rows

You can apply alternating colours to the rows of your table by using the xcolor package with the table option, as demonstrated in the following example:

\documentclass{article}
\usepackage[table]{xcolor}
\setlength{\arrayrulewidth}{0.5mm}
\setlength{\tabcolsep}{18pt}
\renewcommand{\arraystretch}{2.5}
\begin{document}
{\rowcolors{3}{green!80!yellow!50}{green!70!yellow!40}
\begin{tabular}{ |p{3cm}|p{3cm}|p{3cm}|  }
\hline
\multicolumn{3}{|c|}{Country List} \\
\hline
Country Name or Area Name& ISO ALPHA 2 Code &ISO ALPHA 3 \\
\hline
Afghanistan & AF &AFG \\
Aland Islands & AX   & ALA \\
Albania &AL & ALB \\
Algeria    &DZ & DZA \\
American Samoa & AS & ASM \\
Andorra & AD & AND   \\
Angola & AO & AGO \\
\hline
\end{tabular}}
\end{document}

 Open this example in Overleaf.

Example of colouring table row

Notice the braces right before the command

\rowcolors{3}{green!80!yellow!50}{green!70!yellow!40}

and after the tabular environment. The command \rowcolors takes three parameters each passed inside braces:

  • the row to start,
  • the colour for odd rows and
  • the colour for even rows.

See the xcolor package documentation (at the further reading section) for a list of available colours and how to create your own. In the example the colours green and yellow are mixed in different proportions.

For the command to work make sure to add

\usepackage[table]{xcolor}

to the preamble of your LaTeX file.

Colouring a table (cells, rows, columns and lines)

All elements in a table can be customized to use a specific colour. Again, this functionality is provided by xcolor so you must add

\usepackage[table]{xcolor}

to the preamble. Below you can see an example.

\documentclass{article}
\usepackage[table]{xcolor}
\setlength{\arrayrulewidth}{1mm}
\setlength{\tabcolsep}{18pt}
\renewcommand{\arraystretch}{2.5}
\newcolumntype{s}{>{\columncolor[HTML]{AAACED}} p{3cm}}
\arrayrulecolor[HTML]{DB5800}
\begin{document}
\begin{tabular}{ |s|p{3cm}|p{3cm}| }
\hline
\rowcolor{lightgray} \multicolumn{3}{|c|}{Country List} \\
\hline
Country Name or Area Name& ISO ALPHA 2 Code &ISO ALPHA 3 \\
\hline
Afghanistan & AF &AFG \\
\rowcolor{gray}
Aland Islands & AX & ALA \\
Albania   &AL & ALB \\
Algeria  &DZ & DZA \\
American Samoa & AS & ASM \\
Andorra & AD & \cellcolor[HTML]{AA0044} AND    \\
Angola & AO & AGO \\
\hline
\end{tabular}
\end{document}

 Open this example in Overleaf.

Example of customized colour in a table

Below is a description about how to change the colour of each element in the table:

  • Colour of the lines. The command \arrayrulecolor is used for this. In the example an HTML format is used, but other formats are available too, see the xcolor documentation for a complete list (link provided at the further reading section).
  • Background colour of a cell. Use the command \cellcolor. You can either enter the name directly inside the braces (red, gray, green and so on) or pass a format parameter inside brackets (HTML in the example) and then set the desired colour inside the braces using the established format.
  • Background colour of a row. In this case \rowcolor will accomplish that. The same observations about colour selection mentioned in the two previous commands are valid for this one.
  • Background colour of a column. This one is a bit tricky, but the easiest way is to define a new column type. The command
    \newcolumntype{s}{>{\columncolor[HTML]{AAACED}} p{3cm}}
    
    define a column type called s whose alignment is p, the column width is 3cm and the colour is set with HTML format to AAACED. This new column type is used in the tabular environment.

Reference guide

A brief description of parameters in the tabular environment.

Tables can be created using tabular environment.

\begin{tabular}[pos]{cols}
 table content
\end{tabular}

where options can be:

  • pos : Vertical position. It can assume the following values:
t the line at the top is aligned with the text baseline
b the line at the bottom is aligned with the text baseline
c or none the table is centred to the text baseline
  • cols : Defines the alignment and the borders of each column. It can have the following values:
l left-justified column
c centred column
r right-justified column
p{'width'} paragraph column with text vertically aligned at the top
m{'width'} paragraph column with text vertically aligned in the middle (requires array package)
b{'width'} paragraph column with text vertically aligned at the bottom (requires array package)
| vertical line
|| double vertical line
*{num}{form} the format form is repeated num times; for example *{3}{|l}| is equal to |l|l|l|

To separate between cells and introducing new lines use the following commands:

& column separator
\\ start new row (additional space may be specified after \\ using square brackets, such as \\[6pt])
\hline horizontal line between rows
\newline start a new line within a cell (in a paragraph column)
\cline{i-j} partial horizontal line beginning in column i and ending in column j

Further reading

For more information see

Overleaf guides

LaTeX Basics

Mathematics

Figures and tables

References and Citations

Languages

Document structure

Formatting

Fonts

Presentations

Commands

Field specific

Class files

Advanced TeX/LaTeX