% This is ANTS2024samplepaper.tex, based on
% the Springer LNCS samplepaper.tex, a sample chapter demonstrating the
% LLNCS macro package for Springer Computer Science proceedings;
% Version 2.21 of 2022/01/12
%
\documentclass[runningheads]{llncs}
%
\usepackage[T1]{fontenc}
% T1 fonts will be used to generate the final print and online PDFs,
% so please use T1 fonts in your manuscript whenever possible.
% Other font encondings may result in incorrect characters.
%
\usepackage{graphicx}
% Used for displaying a sample figure.
%
% Figures should be in their original vector format (pdf, eps), if applicable.
% Otherwise, figures provided in raster format (png, jpeg, tiff, bmp)
% must be high-resolution (if including linework, at least 800 dpi at the
% final size, otherwise, at least 300 dpi at the final size).
%
% Although figures in the digital proceedings will be in full color, the
% print proceedings of ANTS 2024 will be printed in grayscale. Authors should
% therefore ensure that their figures will be appropriately legible when
% printed in grayscale.
%
% If you use the hyperref package, please uncomment the following two lines
% to display URLs in blue roman font according to Springer's eBook style:
%\usepackage{color}
%\renewcommand\UrlFont{\color{blue}\rmfamily}
%
\begin{document}
%
% For ANTS 2024, full-length papers are strictly limited to 11 pages + references,
% using this template. This page limit include figures, tables, and all
% supplementary sections (e.g., Acknowledgements). The only exclusion from
% these page limits is the reference list, which should have an appropriate
% length with respect to the state of the art.
%
\title{Contribution Title}
% Title must be capitalized according to standard 'Title Case' style (i.e., all
% words should be capitalized, except for articles, prepositions, and conjunctions).
%
% Any acknowledgements should be located at the end of the paper, in a final
% Acknowledgements subsubsection.
% Do not format acknowledgments as a footnote, anywhere in the paper.
%
\titlerunning{Abbreviated paper title}
% If the paper title is too long for the running head, you can set
% an abbreviated paper title here.
% The abbreviated title must also be capitalized according to standard 'Title Case'
% style (i.e., all words should be capitalized, except for articles, prepositions,
% and conjunctions).
% Do not use a \newline command in the abbreviated title.
%
%
\author{First Author\inst{1}\orcidID{0000-1111-2222-3333} \and
Second Author\inst{2,3}\orcidID{1111-2222-3333-4444} \and
Third Author\inst{3}\orcidID{2222--3333-4444-5555}}
% Follow the naming convention in which the surname is the last name.
% In this field, provide the full first names (not only the initials).
% Do not include academic titles (e.g., Prof. or Dr.).
% Springer encourages the inclusion of author ORCIDs.
%
\authorrunning{F. Author et al.}
% In this field, give the initial of the first name(s) and the full surname.
% Give the first author's name. If there are precisely two authors, then
% give both the first and second authors' names (sample: {F. Author and S. Author}).
% If there are more than two authors, use 'et al.' after the name of the first author.
%
\institute{Department of Computer Science, School of Engineering and Applied Science,
Princeton University, Princeton, NJ, USA \and Springer Heidelberg, Heidelberg, Germany
\email{lncs@springer.com}\\ \and
ABC Institute, Rupert-Karls-University Heidelberg, Heidelberg, Germany\\
\email{\{abc,lncs\}@uni-heidelberg.de}}
% Author affiliation information should include the following, using the
% \institute{} and \email{} fields: department, faculty, university,
% company (if applicable), city, country, and email address. Do not include
% the street address or ZIP code (ANTS 2024 does not use a postal address).
% The email address of the corresponding author is mandatory to include.
%
\index{SurnameAuthor1, FirstnameAuthor1}
\index{SurnameAuthor2, FirstnameAuthor2}
\index{SurnameAuthor3, FirstnameAuthor3}
% After the \institute{} entries, include an \index{} entry for each author,
% giving the full surname, followed by the full first name(s).
%
\maketitle % typeset the header of the contribution
%
\begin{abstract}
The abstract should briefly summarize the contents of the paper in
150--250 words.
%ANTS 2024 does not use keywords in the proceedings.
\end{abstract}
%
%
%
\section{First Section}
% Section heading must be capitalized according to standard 'Title Case' style
% (i.e., all words should be capitalized, except for articles, prepositions,
% and conjunctions).
% Headings and subheadings should be aligned to the left.
See the LNCS Springer authors’ guidelines for details on formatting.
In addition, submissions must follow further requirements that are
specific to the ANTS 2024 proceedings. These requirements are included
in this ANTS2024samplepaper.tex template.
\subsection{A Subsection Sample}
% Subsection heading must be capitalized according to standard “Title Case” style
% (i.e., all words should be capitalized, except for articles, prepositions,
% and conjunctions).
Please note that the first paragraph of a section or subsection is
not indented. The first paragraph that follows a table, figure,
equation etc. does not need an indent, either.
Subsequent paragraphs, however, are indented.
\subsubsection{Sample Heading (Third Level).}
% Subsubsection heading must be capitalized according to standard “Title Case”
% style (i.e., all words should be capitalized, except for articles, prepositions,
% and conjunctions).
% Subsubsection heading should end with a period.
Only two levels of headings should be numbered. Lower level headings
remain unnumbered; they are formatted as run-in headings.
\paragraph{Sample Heading (Fourth Level).}
% Paragraph heading must be capitalized according to standard 'Title Case' style
% (i.e., all words should be capitalized, except for articles, prepositions,
% and conjunctions).
%Paragraph heading should end with a period.
The contribution should contain no more than four levels of
headings. Table~\ref{tab1} gives a summary of all heading levels.
\begin{table}
\caption{Table captions should be placed above the
tables.}\label{tab1}
\begin{tabular}{|l|l|l|}
\hline
Heading level & Example & Font size and style\\
\hline
Title (centered) & {\Large\bfseries Lecture Notes} & 14 point, bold\\
1st-level heading & {\large\bfseries 1 Introduction} & 12 point, bold\\
2nd-level heading & {\bfseries 2.1 Printing Area} & 10 point, bold\\
3rd-level heading & {\bfseries Run-in Heading in Bold.} Text follows & 10 point, bold\\
4th-level heading & {\itshape Lowest Level Heading.} Text follows & 10 point, italic\\
\hline
\end{tabular}
\end{table}
For citations of references, in-text citations must use square brackets
and consecutive numbers associated with the ordered reference list at
the end of the paper.
When including your references using a bib file via BibTeX, please refer to
the sample bib provided. A references list at the end of the paper will be
automatically formatted and sorted, from the references cited with in-text
citations. Here is a sample of an in-text citation of a reference~\cite{sample1},
and here is another~\cite{sample2}.
Here is a final sample~\cite{sample3,sample4,sample5}.
% If you are not using a bib file via BibTeX, there is a sample of
% a references list at the end of this template, with the mandatory
% formatting. For this sample reference list,
% the following bibliography provides
% a sample reference list with entries for journal
% articles~\cite{ref_article1}, an LNCS chapter~\cite{ref_lncs1}, a
% book~\cite{ref_book1}, proceedings without editors~\cite{ref_proc1},
% and a homepage~\cite{ref_url1}. Multiple citations are grouped
% \cite{ref_article1,ref_lncs1,ref_book1},
% \cite{ref_article1,ref_book1,ref_proc1,ref_url1}.
\noindent Displayed equations are centered and set on a separate
line.
\begin{equation}
x + y = z
\end{equation}
Please try to avoid rasterized images for line-art diagrams and
schemas. Whenever possible, use vector graphics instead (see
Fig.~\ref{fig1}).
\begin{figure}
\includegraphics[width=\textwidth]{fig1.eps}
\caption{A figure caption is always placed below the illustration.
Please note that short captions are centered, while long ones are
justified by the macro package automatically.} \label{fig1}
\end{figure}
Any lettering in figures must be font size 6 pt or bigger (i.e.,
a minimum character height of 2 mm).
\begin{theorem}
This is a sample theorem. The run-in heading is set in bold, while
the following text appears in italics. Definitions, lemmas,
propositions, and corollaries are styled the same way.
\end{theorem}
%
% the environments 'definition', 'lemma', 'proposition', 'corollary',
% 'remark', and 'example' are defined in the LLNCS documentclass as well.
%
\begin{proof}
Proofs, examples, and remarks have the initial word in italics,
while the following text appears in normal font.
\end{proof}
\subsubsection*{Acknowledgements.}
% Acknowledgements heading should end with a period.
Please place your acknowledgments at the end of the paper (just before the
list of references), preceded by an unnumbered run-in heading (i.e. 3rd-level
heading).
% Do not format acknowledgments as a footnote, anywhere in the paper.
%
%
% ---- Bibliography ----
%
% When using BibTeX, use bibliography style 'splncs04'.
% References will then be sorted and formatted in the correct style.
%
\bibliographystyle{splncs04}
\bibliography{mybibliography}
%
% Below is a bibliography sample using the mandatory style if you choose not to
% use a .bib file via BibTeX.
%
% \begin{thebibliography}{8}
% \bibitem{ref_article1}
% Author, F.: Article title. Journal \textbf{2}(5), 99--110 (2016)
% \bibitem{ref_lncs1}
% Author, F., Author, S.: Title of a proceedings paper. In: Editor,
% F., Editor, S. (eds.) CONFERENCE 2016, LNCS, vol. 9999, pp. 1--13.
% Springer, Heidelberg (2016). \doi{10.10007/1234567890}
% \bibitem{ref_book1}
% Author, F., Author, S., Author, T.: Book title. 2nd edn. Publisher,
% Location (1999)
% \bibitem{ref_proc1}
% Author, A.-B.: Contribution title. In: 9th International Proceedings
% on Proceedings, pp. 1--2. Publisher, Location (2010)
% \bibitem{ref_url1}
% LNCS Homepage, \url{http://www.springer.com/lncs}. Last accessed 4
% Oct 2017
% \end{thebibliography}
%
\end{document}
