This is the PhD Thesis Template of Indraprastha Institute of Information Technology Delhi (IIITD) for the Department of Electronics and Communication Engineering.
\begin
Opdag hvorfor 18 millioner mennesker verden rundt stoler på Overleaf med deres arbejde.
\documentclass[PhD]{iiitd}
%\documentclass[MS]{iiitd}
%\documentclass[MTech]{iiitd}
%\documentclass[BTech]{iiitd}
\usepackage{times}
\usepackage{t1enc}
\usepackage{graphicx}
\usepackage{epstopdf}
\usepackage[hypertex]{hyperref} % hyperlinks for references.
\usepackage{amsmath} % easier math formulae, align, subequations \ldots
\begin{document}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Title page
\title{Your Thesis Title Goes Here}
\author{Your Name}
\date{Date of Thesis Completion}
\department{ELECTRONICS AND COMMUNICATION ENGINEERING}
%\nocite{*}
\maketitle
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Certificate
\certificate
\vspace*{0.5in}
\noindent This is to certify that the thesis titled {\bf \LaTeX\ CLASS FOR DISSERTATIONS SUBMITTED TO IIT-M}, submitted by {\bf Author}, to the Indian Institute of Technology, Madras, for the award of the degree of {\bf Doctor of Philosophy}, is a bona fide record of the research work done by him under our supervision. The contents of this thesis, in full or in parts, have not been submitted to any other Institute or University for the award of any degree or
diploma.
\vspace*{1.5in}
\begin{singlespacing}
\hspace*{-0.25in}
\parbox{2.5in}{
\noindent {\bf Advisor's Name} \\
\noindent Thesis Supervisor \\
\noindent Associate Professor \\
\noindent Dept. of Electronics and Communication\\
\noindent IIIT Delhi, 110020 \\
}
\hspace*{1.0in}
%\parbox{2.5in}{
%\noindent {\bf Prof.~S.~C.~Rajan} \\
%\noindent Research Guide \\
%\noindent Assistant Professor \\
%\noindent Dept. of Aerospace Engineering\\
%\noindent IIIT Delhi, 600 036 \\
%}
\end{singlespacing}
\vspace*{0.25in}
\noindent Place: New Delhi\\
Date: 19th January 2009
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Acknowledgements
\acknowledgements
Thanks to all those who made \TeX\ and \LaTeX\ what it is today.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Abstract
\abstract
\noindent KEYWORDS: \hspace*{0.5em} \parbox[t]{4.4in}{Keyword 1 ; Keyword 2 ; Keyword 3 ; Keyword 4}
\vspace*{24pt}
\noindent Your thesis abstract goes here.
\pagebreak
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Table of contents etc.
\begin{singlespace}
\tableofcontents
\thispagestyle{empty}
\listoftables
\addcontentsline{toc}{chapter}{LIST OF TABLES}
\listoffigures
\addcontentsline{toc}{chapter}{LIST OF FIGURES}
\end{singlespace}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Abbreviations
\abbreviations
\noindent
\begin{tabbing}
xxxxxxxxxxx \= xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx \kill
\textbf{iiitd} \> Indian Institute of Technology, Madras \\
\textbf{RTFM} \> Read the Fine Manual \\
\end{tabbing}
\pagebreak
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Notation
\chapter*{\centerline{NOTATION}}
\addcontentsline{toc}{chapter}{NOTATION}
\begin{singlespace}
\begin{tabbing}
xxxxxxxxxxx \= xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx \kill
\textbf{$r$} \> Radius, $m$ \\
\textbf{$\alpha$} \> Angle of thesis in degrees \\
\textbf{$\beta$} \> Flight path in degrees \\
\end{tabbing}
\end{singlespace}
\pagebreak
\clearpage
% The main text will follow from this point so set the page numbering
% to arabic from here on.
\pagenumbering{arabic}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Introduction.
\chapter{INTRODUCTION}
\label{chap:intro}
This document provides a simple template of how the provided
\verb+iiitd.cls+ \LaTeX\ class is to be used. Also provided are
several useful tips to do various things that might be of use when you
write your thesis.
Before reading any further please note that you are strongly advised
against changing any of the formatting options used in the class
provided in this directory, unless you are absolutely sure that it
does not violate the iiitd formatting guidelines. \emph{Please do not
change the margins or the spacing.} If you do change the formatting
you are on your own (don't blame me if you need to reprint your entire
thesis). In the case that you do change the formatting despite these
warnings, the least I ask is that you do not redistribute your style
files to your friends (or enemies).
It is also a good idea to take a quick look at the formatting
guidelines. Your office or advisor should have a copy. If they
don't, pester them, they really should have the formatting guidelines
readily available somewhere.
To compile your sources run the following from the command line:
\begin{verbatim}
% latex thesis.tex
% bibtex thesis
% latex thesis.tex
% latex thesis.tex
\end{verbatim}
Modify this suitably for your sources.
To generate PDF's with the links from the \verb+hyperref+ package use
the following command:
\begin{verbatim}
% dvipdfm -o thesis.pdf thesis.dvi
\end{verbatim}
\section{Package Options}
Use this thesis as a basic template to format your thesis. The
\verb+iiitd+ class can be used by simply using something like this:
\begin{verbatim}
\documentclass[PhD]{iiitd}
\end{verbatim}
To change the title page for different degrees just change the option
from \verb+PhD+ to one of \verb+MS+, \verb+MTech+ or \verb+BTech+.
The dual degree pages are not supported yet but should be quite easy
to add. The title page formatting really depends on how large or
small your thesis title is. Consequently it might require some hand
tuning. Edit your version of \verb+iiitd.cls+ suitably to do this.
I recommend that this be done once your title is final.
To write a synopsis simply use the \verb+synopsis.tex+ file as a
simple template. The synopsis option turns this on and can be used as
shown below.
\begin{verbatim}
\documentclass[PhD,synopsis]{iiitd}
\end{verbatim}
Once again the title page may require some small amount of fine
tuning. This is again easily done by editing the class file.
This sample file uses the \verb+hyperref+ package that makes all
labels and references clickable in both the generated DVI and PDF
files. These are very useful when reading the document online and do
not affect the output when the files are printed.
\section{Example Figures and tables}
Fig.~\ref{fig:iiitd} shows a simple figure for illustration along with
a long caption. The formatting of the caption text is automatically
single spaced and indented. Table~\ref{tab:sample} shows a sample
table with the caption placed correctly. The caption for this should
always be placed before the table as shown in the example.
\begin{figure}[htpb]
\begin{center}
\resizebox{50mm}{!} {\includegraphics *{iiitd.eps}}
\resizebox{50mm}{!} {\includegraphics *{iiitd.eps}}
\caption {Two iiitd logos in a row. This is also an
illustration of a very long figure caption that wraps around two
two lines. Notice that the caption is single-spaced.}
\label{fig:iiitd}
\end{center}
\end{figure}
\begin{table}[htbp]
\caption{A sample table with a table caption placed
appropriately. This caption is also very long and is
single-spaced. Also notice how the text is aligned.}
\begin{center}
\begin{tabular}[c]{|c|r|} \hline
$x$ & $x^2$ \\ \hline
1 & 1 \\
2 & 4 \\
3 & 9 \\
4 & 16 \\
5 & 25 \\
6 & 36 \\
7 & 49 \\
8 & 64 \\ \hline
\end{tabular}
\label{tab:sample}
\end{center}
\end{table}
\section{Bibliography with BIB\TeX}
I strongly recommend that you use BIB\TeX\ to automatically generate
your bibliography. It makes managing your references much easier. It
is an excellent way to organize your references and reuse them. You
can use one set of entries for your references and cite them in your
thesis, papers and reports. If you haven't used it anytime before
please invest some time learning how to use it.
I've included a simple example BIB\TeX\ file along in this directory
called \verb+refs.bib+. The \verb+iiitd.cls+ class package which
is used in this thesis and for the synopsis uses the \verb+natbib+
package to format the references along with a customized bibliography
style provided as the \verb+iiitd.bst+ file in the directory containing
\verb+thesis.tex+. Documentation for the \verb+natbib+ package should
be available in your distribution of \LaTeX. Basically, to cite the
author along with the author name and year use \verb+\cite{key}+ where
\verb+key+ is the citation key for your bibliography entry. You can
also use \verb+\citet{key}+ to get the same effect. To make the
citation without the author name in the main text but inside the
parenthesis use \verb+\citep{key}+. The following paragraph shows how
citations can be used in text effectively.
More information on BIB\TeX\ is available in the book by
\cite{lamport:86}. There are many
references~\citep{lamport:86,prabhu:xx} that explain how to use
BIB\TeX. Read the \verb+natbib+ package documentation for more
details on how to cite things differently.
Here are other references for example. \citet{viz:mayavi} presents a
Python based visualization system called MayaVi in a conference paper.
\citet{pan:pr:flat-fst} illustrates a journal article with multiple
authors. Python~\citep{py:python} is a programming language and is
cited here to show how to cite something that is best identified with
a URL.
\section{Other useful \LaTeX\ packages}
The following packages might be useful when writing your thesis.
\begin{itemize}
\item It is very useful to include line numbers in your document.
That way, it is very easy for people to suggest corrections to your
text. I recommend the use of the \texttt{lineno} package for this
purpose. This is not a standard package but can be obtained on the
internet. The directory containing this file should contain a
lineno directory that includes the package along with documentation
for it.
\item The \texttt{listings} package should be available with your
distribution of \LaTeX. This package is very useful when one needs
to list source code or pseudo-code.
\item For special figure captions the \texttt{ccaption} package may be
useful. This is specially useful if one has a figure that spans
more than two pages and you need to use the same figure number.
\item The notation page can be entered manually or automatically
generated using the \texttt{nomencl} package.
\end{itemize}
More details on how to use these specific packages are available along
with the documentation of the respective packages.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Appendices.
\appendix
\chapter{A SAMPLE APPENDIX}
Just put in text as you would into any chapter with sections and
whatnot. Thats the end of it.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Bibliography.
\begin{singlespace}
\bibliography{refs}
\end{singlespace}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% List of papers
\listofpapers
\begin{enumerate}
\item Authors.... \newblock
Title...
\newblock {\em Journal}, Volume,
Page, (year).
\end{enumerate}
\end{document}