Bachelor Thesis Template for Indian Institute of Technology Kharagpur (IIT KGP)
\begin
Opdag hvorfor 18 millioner mennesker verden rundt stoler på Overleaf med deres arbejde.
\documentclass[12pt, a4paper, oneside]{Thesis} % Paper size, default font size and one-sided paper
\usepackage{wrapfig}
\usepackage{lscape}
\usepackage{rotating}
\usepackage{graphicx}
\usepackage{caption}
\usepackage{amsmath}
\usepackage{lineno,hyperref}
\modulolinenumbers[5]
\usepackage{amssymb}
\usepackage{graphicx}
\usepackage{array}
\usepackage{float}
\usepackage{placeins}
\usepackage{stackengine}
\usepackage{url}
\usepackage{numprint}
\usepackage{caption}
\usepackage{booktabs}
\usepackage{siunitx}
%\usepackage[showframe=false]{geometry}
\usepackage{subfigure}
\nprounddigits{3}
\newcolumntype{P}[1]{>{\centering\arraybackslash}p{#1}}
\newcolumntype{M}[1]{>{\centering\arraybackslash}m{#1}}
\setstackEOL{\#}
\setstackgap{L}{12pt}
%\usepackage{subcaption} %incompatible with subfig
\graphicspath{{Pictures/}} % Specifies the directory where pictures are stored
\usepackage{natbib} % Use the natbib reference package - read up on this to edit the reference style; if you want text (e.g. Smith et al., 2012) for the in-text references (instead of numbers), remove 'numbers' v
\hypersetup{urlcolor=black, colorlinks=false} % Colors hyperlinks in blue - change to black if annoyingv`
\thesistitle{A thesis on designs}
\supervisor{Professor X}
\degree{Bachelor of Technology}
\degreemajor{Civil Engineering}
\authors{John Doe}
\rollno{12AB123456}
\university{Indian Institute of Technology Kharagpur}
\department{Department of Civil Engineering}
\unisite{http://www.iitkgp.ac.in}
\depsite{http://www.iitkgp.ac.in/department/CE}
\placeshrt{Kharagpur}
\placelng{Kharagpur - 721302, India}
\datesub{November 30, 2016}
\datesig{November 30, 2016}
\semsub{Autumn Semester, 2016-17}
\keywords{Steel Structure}
\coursecd{Project-I (CE57006) }
\title{\ttitle} % Defines the thesis title - don't touch this
\begin{document}
%\makeatletter
%\renewcommand*{\NAT@nmfmt}[1]{\textsc{#1}}
%\makeatother
% prints author names as small caps
\frontmatter % Use roman page numbering style (i, ii, iii, iv...) for the pre-content pages
\setstretch{1.6} % Line spacing of 1.6 (double line spacing)
% Define the page headers using the FancyHdr package and set up for one-sided printing
\fancyhead{} % Clears all page headers and footers
\rhead{\thepage} % Sets the right side header to show the page number
\lhead{} % Clears the left side page header
%\pagestyle{fancy} % Finally, use the "fancy" page style to implement the FancyHdr headers
\newcommand{\HRule}{\rule{\linewidth}{0.5mm}} % New command to make the lines in the title page
% PDF meta-data
\hypersetup{pdftitle={\ttitle}}
\hypersetup{pdfsubject=\subjectname}
\hypersetup{pdfauthor=\authornames}
\hypersetup{pdfkeywords=\keywordnames}
%----------------------------------------------------------------------------------------
% TITLE PAGE
%----------------------------------------------------------------------------------------
\maketitle
%\titlepg % Add a gap in the Contents, for aesthetics
\clearpage % Start a new page
%----------------------------------------------------------------------------------------
% DECLARATION PAGE
% Your institution may give you a different text to place here
%----------------------------------------------------------------------------------------
\Declaration% Add a gap in the Contents, for aesthetics
%----------------------------------------------------------------------------------------
% CERTIFICATE PAGE
%----------------------------------------------------------------------------------------
\addtotoc{Certificate} % Add the "Abstract" page entry to the Contents
\certificate{\addtocontents{toc}{} % Add a gap in the Contents, for aesthetics
\clearpage % Start a new page
%----------------------------------------------------------------------------------------
% ABSTRACT PAGE
%----------------------------------------------------------------------------------------
\addtotoc{Abstract} % Add the "Abstract" page entry to the Contents
\abstract{\addtocontents{toc}{} % Add a gap in the Contents, for aesthetics
Enter content here.
}
\clearpage % Start a new page
%----------------------------------------------------------------------------------------
% ACKNOWLEDGEMENTS
%----------------------------------------------------------------------------------------
\setstretch{1.3} % Reset the line-spacing to 1.3 for body text (if it has changed)
\acknowledgements{\addtocontents{toc}{}%\vspace{1em}} % Add a gap in the Contents, for aesthetics
Enter acknowledgement content here.
}
\clearpage % Start a new page
%----------------------------------------------------------------------------------------
% LIST OF CONTENTS/FIGURES/TABLES PAGES
%----------------------------------------------------------------------------------------
\pagestyle{fancy} % The page style headers have been "empty" all this time, now use the "fancy" headers as defined before to bring them back
\lhead{\emph{Contents}} % Set the left side page header to "Contents"
\tableofcontents % Write out the Table of Contents
\lhead{\emph{List of Figures}} % Set the left side page header to "List of Figures"
\listoffigures % Write out the List of Figures
\lhead{\emph{List of Tables}} % Set the left side page header to "List of Tables"
\listoftables % Write out the List of Tables
%----------------------------------------------------------------------------------------
% ABBREVIATIONS
%----------------------------------------------------------------------------------------
\clearpage % Start a new page
\setstretch{1.5} % Set the line spacing to 1.5, this makes the following tables easier to read
\lhead{\emph{Abbreviations}} % Set the left side page header to "Abbreviations"
\listofsymbols{ll} % Include a list of Abbreviations (a table of two columns)
{
\textbf{FEA} & \textbf{F}inite \textbf{E}lement \textbf{A}nalysis \\
\textbf{FEM} & \textbf{F}inite \textbf{E}lement \textbf{M}ethod \\
\textbf{LVDT} & \textbf{L}inear \textbf{V}ariable \textbf{D}ifferential \textbf{T}ransformer \\
\textbf{RC} & \textbf{R}einforced \textbf{C}oncrete
%\textbf{Acronym} & \textbf{W}hat (it) \textbf{S}tands \textbf{F}or \\
}
%----------------------------------------------------------------------------------------
% PHYSICAL CONSTANTS/OTHER DEFINITIONS
%----------------------------------------------------------------------------------------
%
%\clearpage % Start a new page
%
%\lhead{\emph{Physical Constants}} % Set the left side page header to "Physical Constants"
%
%\listofconstants{lrcl} % Include a list of Physical Constants (a four column table)
%{
%Speed of Light & $c$ & $=$ & $2.997\ 924\ 58\times10^{8}\ \mbox{ms}^{-\mbox{s}}$ (exact)\\
%% Constant Name & Symbol & = & Constant Value (with units) \\
%}
%----------------------------------------------------------------------------------------
% SYMBOLS
%----------------------------------------------------------------------------------------
\clearpage % Start a new page
\lhead{\emph{Symbols}} % Set the left side page header to "Symbols"
\listofnomenclature{lll} % Include a list of Symbols (a two column table)
{
$D^{el}$ & elasticity tensor \\
$\sigma$ & stress tensor \\
$ \varepsilon $ & strain tensor \\
% Symbol & Name & Unit \\
}
%----------------------------------------------------------------------------------------
% DEDICATION
%----------------------------------------------------------------------------------------
%
%\setstretch{1.3} % Return the line spacing back to 1.3
%
%\pagestyle{empty} % Page style needs to be empty for this page
%
%\dedicatory{For/Dedicated to/To my\ldots} % Dedication text
%
%\addtocontents{toc}{\vspace{2em}} % Add a gap in the Contents, for aesthetics
%----------------------------------------------------------------------------------------
% THESIS CONTENT - CHAPTERS
%----------------------------------------------------------------------------------------
\mainmatter % Begin numeric (1,2,3...) page numbering
\pagestyle{fancy} % Return the page headers back to the "fancy" style
% Include the chapters of the thesis as separate files from the Chapters folder
% Uncomment the lines as you write the chapters
\input{Chapters/Chapter1}
%\input{Chapters/Chapter4}
%\input{Chapters/Chapter5}
%\input{Chapters/Chapter6}
%\input{Chapters/Chapter7}
%----------------------------------------------------------------------------------------
% THESIS CONTENT - APPENDICES
%----------------------------------------------------------------------------------------
\addtocontents{toc}{\vspace{2em}} % Add a gap in the Contents, for aesthetics
\appendix % Cue to tell LaTeX that the following 'chapters' are Appendices
% Include the appendices of the thesis as separate files from the Appendices folder
% Uncomment the lines as you write the Appendices
\input{Appendices/AppendixA}
%\input{Appendices/AppendixB}
%\input{Appendices/AppendixC}
\addtocontents{toc}{} % Add a gap in the Contents, for aesthetics
\backmatter
%----------------------------------------------------------------------------------------
% BIBLIOGRAPHY
%----------------------------------------------------------------------------------------
%\nocite{*}
\label{Bibliography}
\lhead{\emph{Bibliography}} % Change the page header to say "Bibliography"
\bibliographystyle{apalike} % Use the "custom" BibTeX style for formatting the Bibliography
\bibliography{Bibliography} % The references (bibliography) information are stored in the file named "Bibliography.bib"
\end{document}